Vacuum Si2oz sintering furnace pneumatic vacuum valve cannot open? The pneumatic valve cannot open is only two reasons: actuator problems or a valve plate jammed. The actuator may be a bad cylinder, a bad solenoid valve, or a rusty jam.

Vacuum furnace can be used for vacuum sintering, that is, in the vacuum state, heating metal powder products, so that adjacent metal powder grains through adhesion and diffusion and sintering into parts. Vacuum furnace is vacuum sintering furnace, according to the application of equipment to disting

Silicon carbide sintering furnace carbon and carbon two differences: carbon: represents the element, is a chemical element. Carbon: A specific substance composed of carbon. The Chinese name for chemical element C is carbon, that is, carbon is 100%C. Carbon has three allotropes, amorphous carbon, gra

Graphitization furnace, mainly used for carbon materials sintering and graphitization, PI film graphitization, heat conduction materials graphitization, carbon fiber rope sintering, carbon fiber filament sintered graphitization, graphite powder purification and other materials can be graphitized in

Sintering: The powder material after pressing forming under the action of high temperature below the melting point, through the mutual bonding and material transfer between the billet particles, so that the pore elimination, volume shrinkage, strength improvement, gradually into a certain geometric