Views: 0 Author: Site Editor Publish Time: 2023-05-05 Origin: Site
Vacuum sintering furnace is mainly used for the sintering process of semiconductor components and power rectifier devices. It can be used for vacuum sintering, gas protection sintering and conventional sintering. It is a novel process equipment in the series of special equipment for semiconductor.
If the vacuum exhaust time is longer than usual, the equipment should be stopped for inspection. According to the influence of gas discharge in different states of the vacuum chamber structure, the pressure may also rise. Confirm a leak and the effects of venting through a pressure rise test or helium leak detection.
In vacuum and protective atmosphere, the metal, ceramic and some refractory metal intermediate compound powder heating sintering, to obtain a certain density and mechanical properties of the material, generally using two processes; Namely pressure sintering and non-pressure sintering.
Vacuum sintering furnace is mainly used for the sintering process of semiconductor components and power rectifier devices. It can be used for vacuum sintering, gas sintering and conventional sintering. It is a novel process equipment in the series of special semiconductor equipment. It has novel design concept, convenient operation, compact structure, and can complete multiple process flow in one equipment.
Daily use skills of vacuum sintering furnace:
1. Check whether all parts and accessories in the control cabinet are complete and intact.
2. The control cabinet is installed on the corresponding foundation and fixed.
3, according to the wiring diagram, and refer to the electrical schematic diagram, connect the external main circuit and control circuit, and reliable grounding, to ensure the connection is correct.
